Showing posts with label paper crafting. Show all posts
Showing posts with label paper crafting. Show all posts

Tuesday, December 14, 2010

Paperback Tree

I've got an easy-peasy, last minute project for you that you'll be able to put together while watching A Christmas Story or
It's a Wonderful Life. . .Really!
And you don't need many supplies either. . .Honestly!
In fact, this is really all you need to make the Paperback Tree shown at the top of this post! Well, it doesn't have to be a Nora Roberts novel~ any paperback book will do. But just make sure it's a book you're finished reading!
The first thing you're going to do is tear off the front and back covers,
leaving the binding in tact.
One the first page, take the top corner and fold it down to meet the binding.
Then fold the same folded page down to meet the binding again.
There will be a small triangle of the bottom of the page hanging below the book. Take that triangle and fold it up so that it is even with the bottom of the book. Three folds, that's it!
Now go to the next page and make those same three folds.
And repeat the folding process on every single page.
That's right, keep on folding. You may want to use a bone folder to make the creases nice and crisp, but that's up to you.
Another tip: If you find that the pages you've already folded are getting in your way, you can clip them together with a binder clip. The folding does become a little more difficult as you get towards the back of the book. If you feel that your tree seems full enough and you still have pages left to fold, you can do what I did and cut off the the remaining pages by cutting through the binding with a craft knife.
When you are finished folding all the pages, this is what you will end up with. Pretty cool, huh?
You can leave the pages natural, as shown above. Or perhaps you'd like to add some color by spritzing with a little Glimmer Mist (see previous post). And then to finish off the tree it would be nice to add some sparkle to the top of the tree, like the rhinestone pin I used to top mine off.
I decided to use some spray adhesive on my tree and then sprinkle glitter and mica flakes on it.
And now it sparkles next to my other snow covered Winter Wonderland Decorations!
And that's all there is too it! I told you it was easy-peasy, didn't I?

I hope those of you who participated in Joli Paquet's Vintage Stocking Swap have mailed your stockings out to your partners by now. I've received mine and was delighted by the gorgeous stocking and goodies I received!

On behalf of all the Joli Paquet artists, I would like to thank you for your loyal support and hope that you have enjoyed this year's tutorials and kits as much as we've enjoyed putting them together for you. Wishing you all a wonderful, safe and memory-filled holiday season!

xoxo

Tuesday, November 16, 2010

Merry & Bright Crepe Paper Christmas Tree Tutorial

Hi Everyone! Cindy here! I hope you are enjoying this round of Joli Paquet for the Holidays! Today I am going to show you how to make a Merry and Bright Crepe Paper Christmas Tree!


This is a fun project to do with the kids or let them make their own. It's also a project that consists of supplies you probably already have around the house. Keep in mind you can us any color crepe paper you want. You can use all one color or multiple colors.

Supplies Needed:
Paper or Cardboard Cone (I purchased mine at Michael's but you could also use a styrofoam cone or make your own cardboard cone out of recycled cereal boxes.)
Crepe Paper (any color)
Yarn (color to coordinate with your crepe paper)
Any kind of ribbon trim (I used white pom pom trim)
Double sided tape
Craft Glue (clear drying)
Glitter (any kind but I love mine from Little Pink Studio!)
Scissors
Old paintbrush, craft stick, or toothpick

Let's get started!

Step 1: Starting at the bottom of the cone and about an inch up apply double sided tape all the way around the cone. You just want the tape to be where the top of the crepe paper will be. This is where you will begin to make and stick the crepe pleats or ruffles.

Step 2: Start with the color of your choice and stick one end of the crepe paper onto the tape. Let the paper overhang at the bottom just a bit.

Step 3: Begin folding the crepe paper to make small pleats and stick down to the tape.

Step 4: Work your way all the way around the cone with the pleats. When you come back to where you started place a piece of double sided tape at the seam.

Step 5: Fold under the end and stick down at the seam.

Step 6: Now repeat steps 1-5 until you get all the way to the top of the cone. If you have chosen multiple colors, alternate the colors as you move up the cone. Be sure and overlap the bottom of the top row onto the row underneath to cover up the top of the pleats.

It should look something like this as you are working the next row.

As you work your way up it should look something like this.

Step 7: Making the Pom Pom top. Wrap yarn around a playing card or even your fingers. The thicker the wrap the thicker your pom pom will be.

Step 8: Slide the wrap off the card. Cut a length of yarn and tie it around the middle of the yarn wrap.

Step 9: Cut the loops on both sides.


Step 10: Fold the pom in half at the middle and give it a good trim.

Step 11: Glue the pom to the top of the tree. You can trim more if needed. Mine is kinda wild! LOL


Step 12: Add any type of trim at the top of the tree under the pom to cover up any gaps. I used mini pom trim but you can use ribbon, ric rac, etc.

Step 13: Using an old paint brush, craft stick, or tooth pick apply clear drying craft glue to the bottom of the edge of the first layer.

Step 14: Apply glitter to the glue.

Step 15: Repeat steps 13-14 until you have done all the layers of the tree. Let DRY. I also applied glitter to the pom pom top and pom pom trim.


And your cute bright festive tree is done!!!! I hope you had fun and I hope you will make an entire forest of trees! They are quick, easy, and inexpensive and they add a special touch to your Holiday decor! This is a great project to do over the Thanksgiving break. Get the entire family involved!

Be sure and post any trees you make in our Joli Paquet Flickr group (see the link the left). We would love to see your cute trees!!!

Happy Holiday Crafting,

Monday, October 4, 2010

A Little Halloween Curiosity







Its that time of year again! There is a chill in the air, pumpkins are placed on the porch, and Joli Paquet is back! I hope you all had a fantastic summer! We sure did, but I am so ready for Fall. It was a REALLY hot summer in Texas. Well, it hasn’t cooled off much yet but, this tutorial is sure to chill your bones! This project may look a little scary and daunting but its easier to make than you think.


Supplies

Arondack alcohol ink (assorted dark colors)
Scrapbook paper ( I used Pink paislee Eclipse)
Design-Ables Self-stick clear Matte paper
Distress ink and blending tool
Bone folder
Drill
Wire
Foil Tape
Halloween Stamps
Stazon ink
Plexiglas- you can buy this at Lowes in a Varity of sizes, they will even cut it for you, or find it here.


1. Plexiglas will come with protected cover. Leave this on for now. Mark glass with permanent marker for where you want hanging holes. Place glass over wood or something similar that is ok to drill into. Using firm-Not hard- pressure slowly begin to drill hole. Repeat.

2. Lay glass over paper in desired spot and trace around. Cut.



3.Ink edges of paper.



4. Peel off protective cover on glass. Cut four strips of foil tape to fit edges of glass. Using bone folder and ruler crease each tape to width you want to show on front.


5. Lay glass on top of paper. Apply tape to edge, then wrap around to back and apply on top of paper. Burnish tape with bone folder. Finish covering back with foil tape if desired.
6. Take several different shades of dark alcohol ink and apply to felt pad and blending tool. Dap foil until you have a mottled, aged look. Let dry.

7. Use Stazon Ink and Halloween stamps. Stamp directly onto front of glass. Let dry.



8. Print desired image onto Design-ables self-stick paper.

9. Peel backing off one corner and apply to glass. Using bone folder or another edge slowly peel and burnish image onto glass.

10.Poke holes into paper .Add wire or ribbon to holes. Gems, buttons, and other embellishments could also be added to sign using Inkssential Glossy accents.

How spooky would this look hanging in a window or in front of a mirror! I hope you give this tutorial a try! Its lots of fun. Help us spread the spookyness and grab our blog button for your blog. ~Brandy




Tuesday, April 20, 2010

Paper Roses

"Paper roses, Paper roses
Oh how real those roses seem to be."
~ Recorded by Marie Osmond in 1973 ~

Hi there and welcome to another crafty springtime tutorial. A couple months ago I posted a pic of a project on my blog in which I used some handmade paper roses. I had lots people ask me how I made them, so I thought I would do a tutorial here on Joli Paquet and show you the step by step process.
Here are the supplies you will need to complete this project.
It really doesn't take very much at all.

1. For each paper flower you will need to punch 3 flowers from the pages of an old book. Using a scissors, cut the flowers as shown in the photo on the right above. Hang on to all the flower parts, because we will be using all of them.
2. Using a white, clear drying craft glue, apply a little bit on the petal as shown above. Next place the petal next to it on top of the petal with the glue (see arrow above) and you will end up with a 3-dimensional four petal flower.
3. Next we will work on the flower on which you cut off one of the petals. Follow the steps above, putting glue on the one petal and bringing the other petal on top of it (see arrow above) and you will end up with a 3-dimensional three petal flower.
4. Using the same technique in steps 2 and 3, apply glue to the petal of the
last flower and place it on top of the petal with the glue.
You will end up with a cone shape 3 dimensional flower when you are done.
5. Apply a dab of glue in the center of the four petal flower.
6. Take the three petal flower and gently flatten the pointy end on the bottom so it will be easier to glue inside the four petal flower.
Your flower should look like the one pictured above at this point.
7. Repeat step 6 with the last 3-dimensional flower.
Your flower should now look like the one in the right hand photo above.
8. For the two remaining flower pieces, roll each of them tightly into a tapered tube-like shape and apply glue to the end to secure.
9. Snip off the end of both of these flower parts to make them a little shorter.
These two pieces will form the center of the rose.
10. Glue both of these rolled up flower parts in the center of the flower.
11. Once the glue has dried, you are ready to add some color to your flower. I used Glimmer Mist because I like the soft colors and the shimmer this product adds to the flowers. But any type of spray-on coloring agent will work. Just be sure to test it on a sample piece of paper because the intensity of color varies from brand to brand. Pictured above are some of the colors I have used when making my paper roses. You can also try applying the color before putting the flower together for a different look.
These flowers can be used in a multitude of ways. Pictured above is a hanging heart I made earlier this year. I used a tiny flower punch to create these smaller size roses. What fun it would be to add this to your Mother's Day gift wrapping.
Use three of the larger roses to create this paper corsage for Mom or Grandma to wear on Mother's Day or use as an embellishment on a gift bag.
I brushed some white craft glue onto the petals and sprinkled crystal glitter on top to give the flowers even more sparkle. A brass charm adds the finishing touch. {I have a limited supply of these "Mother" charms in my Etsy shop here.}
Here I covered a paper mache box with vintage wallpaper and a paper doily to create an adorable trinket box to give as a gift this Mother's Day. I used three large natural glittered roses in the center along with pearl stamens tucked in between the flowers. A tiny paper tag finishes off the box.
I'm sure you will have lots of fun making these paper roses and will find many uses for them in your artwork. I'd love to see what you create with them, so be sure to add your photos of this and any other Joli Paquet projects to our Flickr site here.

xoxo